Dell C1100, CS24-TY Mezzanine Card (10 GbE LAN)

74 Installing System Components
Mezzanine Card (10 GbE LAN)
Removing the Mezzanine Card (10 GbE LAN)
CAUTION: Many repairs may only be done by a certified service technician.
Youshould only perform troubleshooting and simple repairs as authorized in
yourproduct documentation, or as directed by the online or telephone service
andsupport team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
withthe product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2 Open the system. See "Opening the System" on page 53.
3 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page54.
4 Remove the riser card assembly. See "Removing the Expansion-Card Riser"
on page 66.
5 Remove the three spacer pins on the mezzanine card.
6 Remove the single screw securing the card and remove the card.
SeeFigure 3-14.
7 If you are not installing another mezzanine card, install the
mezzanine-card cover and secure with two screws. See Figure3-15.
book.book Page 74 Friday, December 4, 2009 4:13 PM