SECTION 14—SCOOTER ACCESSORIES
INSTALLING/REMOVING THE WALKER HOLDER
NOTE: Reverse this procedure to remove the walker holder.
NOTE: For this procedure, refer to FIGURE 14.4.
1.If necessary, loosen but do not remove the mounting knob.
2.Install the walker holder into the accessory tube.
3.Thread the mounting knob into the welded nut on the accessory tube. Securely tighten.
Mounting
KnobSeat
Accessory
Tube
Walker Holder
FIGURE 14.4 - INSTALLING/
REMOVING THE WALKER HOLDER
USING THE WALKER HOLDER
NOTE: For this procedure, refer to FIGURE 14.5.
1.Fold walker. Refer to walker instructions.
NOTE: Walker MUST be folded before using walker holder.
2.Hang folded walker on walker holder hooks.
3.Secure walker with hook and loop straps.
Hook
Hook and
Loop Strap
FIGURE 14.5 - USING THE WALKER
HOLDER
Part No. 1118395 | 67 | 300 and 400 |
