Snom M9 quick start Handset registration, Configuration of a VoIP account

E	snom m9 Quick Start Guide
N
G
L Front view
I
S		Earpiece
H

	Color display
Left function key	Right function key
In idle mode:	In idle mode:
Call lists	Edit SIP registrations
Green phone key	Red phone key
Accept calls	Terminate calls
Dial number	Cancel actions
Confirm actions	Power on/off
	Alphanumerical
Star key	keypad
Change input mode	R key
(numbers, small/
	Lock/unlock keypad
capital letters

Navigation key

In idle mode, press top/bottom/right/left edge (depicted in this guide by h/i/g/f, respectively) or the button in the center () to open the following menus or functions:

Main menu i Directory f Intercom

g Settings menu

h Preferences menu

In other contexts press h or i to navigate in menus and lists.

			snom m9 Quick Start Guide	E
				N
Display layout, idle screen				G
				L
				I
			Status line	S
Signal strength:			Battery charging	H
High=green			status
Low=gray			Red=critical
			Yellow=under 50%
			Green=over 50%
Handset ID:			Time and Date
Call lists:
			Function key line
Missed
Received	Preferences		with context-sensitive
			symbols
Dialled		Menu

Edit SIP registrations

Handset registration

1.Press (red phone key). The display will show: "Searching for Base". Once the handset has found the base station, it will display the PIN prompt .

2.Enter the default PIN "0000".

3.Press "OK".

Note: If the handset fails to register automatically, a manual registration can also be performed. Press "->" to enter the Settings menu. Enter the Handset menu and press "Register Handset". Select "Base 1". Enter PIN and press "OK" to register the handset.

4.Once the handset has registered with the base, the idle screen will display [- - -] instead of the handset ID .

Configuration of a VoIP account

1.Press "+" on the Volume adjust key. The IP address of the base station is displayed on the screen. Write it down.

16 17