_ Switching and checking in the counting mode
Loading memory
Enter number of pieces for set point with the numeric keyboard.
Press the ”Ld” command key, followed by the number of the memory.
Confirm your entry by pressing the function key.
Memories 2 and 3 are entered and displayed in the same way.
Recalling of stored values
Press the ”i” command key and the number of the memory containing the value you require.
Confirm your entry with the ” 
” function key.
Counting with limit values
Tare the container
Place the items to be counted on the scale.
The relevant symbol goes out when the appropriate set point/limit value is reached.
Clearing memory
Press the ”CI” command key.
Now enter the number of the memory you wish to delete.
Confirm your entry with the appropriate function key. Simply overwriting the memory as described under ”Loading the memory” also deletes the current value.
Control weighing
Enter the upper and lower tolerance number of pieces as in ”Loading memory” in S1 and S2. Place the items to be counted on the scale. The current number of pieces and the tendency symbol appear on the main display:
Number of pieces is less than set value ”S1”
Number of pieces is within the tolerance
Number of pieces is higher than set value ”S2”
10