Soehnle 2761 _ Defining the print image: data transfer

_ Defining the print image: data transfer

The first programmed data block is displayed (4-digit code number) after the key has been pressed to activate printing (CAL step 19...24). The incrementing of the tens column from left to right is achieved using the ”0” key as with user modifications. Modifications with the numeric keyboard. The displayed value is transferred by pressing the ”K” key. The next data block is then displayed.

Code of 4 positions:

print code positioning/beginning of printing

Every print code requires a positioning/beginning of printing. The positioning has to be additive, that is to say that in case of several data blocks in one line, you should subtract the positioning of the blocks before. Each line closes with the code ”3.300”. An i.e. line is programmed with ”3.300”, too. This means, that ”3.300” always creates a new line. The print image presentation is terminated by ”3.400”. When the values are transferred using the ”K”-key the display moves forward to the next CAL-step. You return to the weighing mode by pressing the ”x10”-key.

Print-		Print-			Settings	length	Comment
code		code				Block
intern			PC
									Digit
Printcode	Positioning	Printcode		Positioning		Position data		<Unit>
00XX		B XX			Gross weight	15	G XXXXX,XX <Unit>
01XX		D XX			Date	8	XX.XX.XX
02XX		d XX			Date 1x	8	for pressing tke key just once
03XX		E XX			Orga-data 1		No. 1 XXX... max. 39 pos.
04XX		e XX			Titel Org. 1		blank
05XX		F XX			Orga-data 2		No. 2 XXX... max. 39 pos.
06XX		f XX			Titel Org. 2		blank
07XX		G XX			Orga-data 3		No. 3 XXX... max. 39 pos.
08XX		g XX			Title Org. 3		blank
09XX		K XX			Components	18	K XX XXXXX,XX <Unit>
10XX		k XX			Total components	16	K-Total XXXXX,XX <Unit>
11XX		L XX			Current number	15	Current No. XXXXXXX
12XX		N XX			Net weight	16	N XXXXX,XX <Unit>
13XX		n XX			Net weight total	16	N-Total XXXXX,XX <Unit>
14XX		P XX			Piece	18	PCS XXXXXXX
15XX		p XX			Total number of pieces	18	Total number of pieces XXXXX,XX
16XX		R XX			Reference weight	17	REF XXXXX,XX <Unit>
17XX		S XX			Status for break-over points	5	S XXXX
18XX		T XX			Tare weight	15	T XXXXX,XX <Unit>
19XX		U XX			Time	5	XX:XX
20XX		u XX			Time 1x	5	for pressing tke key just once
21XX		Ü XX			Status for overloading, underloading and standstill	4	U XXX
22XX		W XX			Balance number	2	W X
23XX			0		Attribute 1		Programmation on PC only
24XX			1		Attribute 2		Programmation on PC only
25XX			2		Attribute 3		Programmation on PC only
26XX			3		Attribute 4		Programmation on PC only
27XX			4		Attribute 5		Programmation on PC only
28XX			5		Text 1		Programmation on PC only
29XX			6		Text 2		Programmation on PC only
30XX			7		Text 3		Programmation on PC only
31XX			8		Text 4		Programmation on PC only
32XX			9		Text 5		Programmation on PC only
33XX			,		Linefeed		<LF> line feed (OAH)
34XX					ETX/ End of print format		<ETX> end of text (03H)
35XX		bxx			Total gross	16	B-Total XXXXX.XX <Unit>
36XX		txx			Total tare	16	T-Total XXXXX.XX <Unit>

Positioning

Positioning on the right side

Always column 00
Positioning on	the left side
Always column 00
Positioning on	the right side

16