An acoustic signal confirms that the entry is correct
Incorrect entries are indicated by means of five acoustic signals in swift sucession.
Please check that your entry is correct. If necessary, cancel the command sequence by pressing the ”CI” key.
The indicator 2761 has a wide range of memory options:
10 tare memories
3 memories for organisational data
3memories for set points or limit values in the weighing and counting mode
and in counting mode
40reference weight memories These memory options are operated by means of the
numeric keyboard manual entry
and for calling the relevant memory number
command keys for loading, calling and deleting
function keys for activating the function
Loading values
Loading the value which is in the secondary display or which has been entered manually using the numeric keyboard:
Press the ”Ld” command key.
Now enter the number of the memory in which you wish to store the value.
Confirm your entry by pressing the appropriate function key (in this case ”Tare”)
The procedure is the same for organisational data memory, limit value memory and tare memory. The reference weight memory is only available in counting mode. Switch over if necessary.
Recall of stored value
Press the ”i” command key and the number of the memory where the value you want is stored. Please note that reference weights can only be called in counting mode.
Confirm your entry by pressing the appropriate function key (in this case the limit memory)
Tare memory values and (in counting mode) reference weight memory values are activated by pressing the function key again (in this case the limit value memory).
Clear memory
Press the ”CI” command key. Then enter the number of the memory you want to clear.
Confirm your entry by pressing the appropriate function key (in this case Count). Simply overwriting the memory as described under ”Loading values” also deletes the current value.
3