English
3.2.3 Taring
Taring functions same as for 3.1 Weighing and taring.
3.2.4 Operating the totalising functions
Press the F key to transfer the weight on the weighing platform to the total memory.
The item counter and the consecutive number are incremented by 1.
Before requesting the next total, the scale must be clipped off at least to the clip off factor defined in Setting mode.
A weight value of 0 or a total without clip off results in "Error 55 Place weight on scale". If the clip off factor = 0, only a brief weight change is required.
Ending the totalising function
The totalising operation is terminated by pressing the key combination INFO, F and Print. At the same time, the totals are printed out with the additional information dependent on the print template, or they are transferred and deleted as data record.
3.2.5 Selection options for total display
Function description in the manual.
-Display, print and clear total.
-Only display totals.
3.2.6 Clip off factor when totalising
(no function when batching)
In Setting mode, you can define (see manual) whether the scale must be clipped off each time you place an individual piece by 1 to 30 increments.
If the scale is not clipped off, the weight unit is not accepted in the total memory. This prevents operations such as saving an item twice.
3.2.7 Automatic totalising
See the description of the function in the CD manual.
19
