English
3.1.3 Weighing without taring
Place weighing product on the scale. The weight is indicated with the message "Gross".
3.1.4 Manual taring
Measure and tare with a container of unknown weight. Place the empty container on the scale.
Press the Tare key.
The tare value is saved. The weight display is zeroed. The weight is displayed with the message "Net".
When the scale is clipped off, the tare weight is displayed with a negative sign. If you press the Tare key again, the existing value is overwritten, i.e. a new tare weight placed on the scale is saved. The scale can be tared an unlimited number of times until the maximum load is reached. The tared weight reduces the maximum weighing range accordingly.
Clear tare: By overwriting with a new tare or 0 or by pressing the Zeroing key.
Display tare memory: Press Info key, then press the Tare key. You can clear the tare memory in decades by pressing the C key.
Press the Zeroing key to terminate the display of the tare memory without saving any changes. If you want to change the tare memory value, type in the new value into the numerical keypad and press the Tare key to accept the manual tare input in the tare memory.
3.1.5 Taring by manual tare input
... | Taring a known container weight, e.g. with filled container on the scale. |
Type the known tare weight into the numerical keypad. The input appears on the | |
| indicator. The input is displayed in the activated weight unit. |
| Press the Tare key. |
The input is accepted in the tare memory and the tare weight is subtracted from the weight displayed. The weight is displayed with the message "Net".
When the scale is clipped off, the tare weight is displayed with a negative sign. Clear tare by overwriting with a new manual tare input or 0 or by pressing the Zeroing key.
Display the tare memory by pressing the Info key, then press the Tare key. You can clear the tare memory in decades by pressing the C key. Press the Zeroing key to terminate the display of the tare memory without saving any changes.
If you want to change the tare memory value, type in the new value into the numerical keypad and press the Tare key to accept the manual tare input in the tare memory.
14
