Soehnle 3020 manual Installation and commissioning, Operating concept, keys and display symbols

English

1.3 Installation and commissioning

Before connecting up the appliance, make sure that the power supply complies with the specifica- tions on the appliance nameplate, and the power plug version conforms to local regulations. Place the connected scales on a level and stable surface. Select an installation site where the appliance is not exposed to shocks, vibrations, intense heat or cold, draughts, chemicals and moisture.

The appliance may only be opened by trained service technicians. Before working on the appliance, unplug the power supply.

After power-on, the measured values will stabilise after a warm-up period of 30 minutes. Further information on power-on is provided in the Operating Manual 3020 on the CD.

Connections

Power supply

Ground (GND)

Scale 1

Interfaces 1 + 2 Pressure compensation membrane

Anybus interface

1.4 Operating concept, keys and display symbols

The setting options are divided into two function ranges:

Setting mode

Here you can enter user-definable settings on the appliance to adapt the weighing system to your requirements. For a detailed description, refer to Chapter 2 Setting mode in the manual.

Program settings	Terminal	Scale	Data processing	Service
General	Version	Scale parameters	Data transfer	Only for service
Weighing + taring	Display		Alibi memory	technicians
Totalising + batching	Keypad		Interface 1
Counting	Date/time		Interface 2
Checking	Organisation data		Print template
	User password		Data processing settings
	Reset terminal		Fieldbus
			Barcode

4