Soleus Air air-condition owner manual Remote device, Switch, Choose button “MODE”

Remote device

Operation through the control panel or remote device

Through the control panel in the room, user can control all functions of the air-conditioner. The parts of control contain the following functions:

1.Switch

The air-conditioner can be started or stopped by the button “ON/OFF”. The indicator lamp “POWER” in the upper left corner is lighted when air-conditioner is running.

2.Choose button “MODE”

This button confirms the working status of the air-conditioner.

You can switch it in:”FAN” state, “COOL” state and “HEAT” state.

3.Temperature setting button “TEMP”

Through buttons “▲” and “▼”, you can increase and reduce the setting temperature in the room.

4.Fan speed switch button “SPEED”

You can switch fan speed in “HIGH” or “LOW”.

5.Temperature showing “temperature”

In holding state, control panel shows present indoor temperature. The control panel shows temperature in setting state. If you don’t press the “TEMP” key more than ten minutes, the

control panel will be back awaiting state and show present indoor temperature.

6．Push“SPEED+MODE”(in the control panel) or “SET”(in the remote device) into setting state In this state you can set parameter with “▲” and “▼”.

3