Soleus Air GH-PAC-12E1HP WITH HEAT Ating Instructions, Remote Control Oper, Auto, Cool, Heat

REMOTE CONTROL OPER ATING INSTRUCTIONS

SIGNAL TRANSMITTER

REMOTE CONTROL

BLOW

ON/OFF ON/OFF BUTTON

Press theON/OFF (POWER) button once to manually turn the unit on. Press the Power button once more to turn the unit

MODE MODE BUTTON

Press theMODE Button repeatedly to cycle between the dierent modes.

AUTO
COOL
DRY
FAN
HEAT	NOTE: Heat Mode is only
	available on GH-PAC-12E1HP

- / + - / + BUTTONS

When the unit is in Air Conditioner or Heater (GH-PAC- 12E1HP) mode you can select your desired temperature. Press theTEMP SELECT buttons (+ or -) to select

your desired temperature setting. The temperature on the LCD display on the remote control will increase or de- crease accordingly. Hold the +/- buttons for two seconds to rapidly increase or decrease the temperature. Temp. range is 61°F—86°F.

FAN FAN BUTTON

Press the Fan Speed button to change fan speeds.

Fan Speeds:

Low Speed Medium Speed

High Speed

NOTE: When the unit is in Dehumid (DRY) mode, the fan speed is not adjustable.

SWING BUTTON

Press the Up and Down Swing Button to turn on and the vertical swing mode. In vertical swing mode, the lou- vers will rotate up and down to circulate more air.

When the unit is o, press the Up and Down Swing But- ton and “+” at the same timeo enable stationary swing mode. Stationary Swing mode allows for more control over the way the louvers swing up and down. The Swing icon on the Remote LCD will blink twice when this is

Blinks for 2 Seconds

In Stationary Swing mode, press the Up and Down Swing Button to change the swing pattern per below:

Disable Stationary Swing Mode by pressing the Up and Down Swing Button and “+” button at the same time. The Swing Icon on the Remote LCD will blink twice when this is disabled.

10