1Protection
Operating condition
The protective device maybe trip and stop the appliance in the cases listed below.
HEATING | Outdoor air temperature is over 75 f | |
Outdoor air temperature is below | ||
| ||
|
| |
| Room temperature is over 80 f | |
| Outdoor air temperature is over *110 f | |
COOLING | (or below 32 f for inverter models) | |
| ||
Room temperature is below 69 f | ||
| ||
DRY | Room temperature is below 64 f |
*For Tropical (T3) Climate condition models, the temperature point is 96 f instead of 96 f.
If the air conditioner runs in COOLING or DRY mode with door or window opened for a long time when relative humidity is above 80%,dew may drip down from the outlet.
Noise pollution
Install the air conditioner at a place that can bear its weight in order to operate more quietly.
Install the outdoor unit at a place where the air discharged and the operation noise would not annoy your neighbors.
Do not place any obstacles in front of the
air outlet of the outdoor unit as it will increase the noise level and possible malfunction
of fan motor.
Features of protector
The protective device will work as follows.
Restarting the unit at once after operation stops or changing mode during operation, you need to wait 3 minutes.
Connect to power supply and turn on the unit at once, it may start 20 seconds later.
If all operation has stopped, press ON/OFF button again to restart.
Timer should be set again if it has been canceled.
Inspection
After using for long time, the air conditioner should be inspected on the following items.
Overheat of the power supply cord and plug or even a burned smell.
Abnormal operating sound or vibration. Water leakage from indoor unit.
Metal cabinet electrified.
Stop the air conditioner if above trouble occurs. It is advisable to have a detail inspection after using it for 5 years even if none above occurs.
Features of HEATING mode
Preheat
At the beginning of HEATING operation, the airflow from indoor unit is discharged
Afterheat
After the finishing of HEATING operation, the airflow from indoor unit is discharged
Defrost
In HEATING operation the appliance will defrost
After defrosting completes, it returns to HEATING mode automatically.
Note: Heating is NOT available for cooling only air conditioner models.
10