1Operation Instructions
FEEL mode operation procedure
Operates by selecting automatically the operation mode(HEAT,DRY,FAN,COOL)depending on the room temperature during staring.
With the remote control pointing toward the air conditioner.
Turning on
Press | ON/OFF | button, when the appliance receives the | 1 |
|
| ||
signal, the RUN indicator of the indoor unit lights up. | |||
When the unit is not at FEEL mode.
SLEEP TIMER ON TMIER OFF
FEELAUTO
COOLHIGH
DRYMID
FANLOW
HEATSWING
Selecting FEEL mode
Press the MODE select button.
|
| 2 | SLEEP |
| FAN |
Move the MODE to the FEEL position. | TIMER |
| SWING | ||
|
|
|
| ||
|
|
| MODE |
| ON/OFF |
Operation mode and temperature are determined by indoor temperature | 2 | 3 | 1 | ||
|
|
| |||
Indoor temperature | Operation mode | Target temperature |
|
|
|
Less than 68 f | HEATING ( FOR HEAT PUMP TYPE) | 73 f |
|
|
|
FAN (FOR COOL ONLY TYPE) |
|
|
| ||
|
|
|
|
| |
68 f - 79 f | DRY | 64 f |
|
|
|
Over 79 f | COOL | 73 f |
|
|
|
Air temperature adjustment is possible even during FEEL operation.
There are 4 levels of adjustment possible with the 
button or
the 
button.
Setting temperature
Press the | button or the | button. |
When the | button is pushed,the temperature will increase 1 f . | |
After temperature will increase 2 f,the indicator will not change.
When the 
button is pushed,the temperature will reduce 1 f .
After temperature reduce 2 f ,the indicator will not change.
NOTE
There will be a delay when changing mode
is made during the operation.
As there might not be air blown out.
The operation of the AUTO mode can be performed by only pressing the ON/OFF button from the next time.
If you don't like the content of FEEL mode operation,
change to HEATING,DRY or COOLING than FEEL.
7
