1Remote Control
Remote Control
The remote control transmits signals to the system.
ON/OFF button
Used to start and stop operation .
TIMER button | Setting Display |
Used to select TIMER operation.
UP button (TOO COOL button)
Used to increase the set room temperature (60 f ~87 f) and time(0.5~24h or 1~12h ).
DOWN button (TOO WARM button)
Used to decrease the set room temperature and time.
SLEEP button QUIET
Used to set or cancel sleep operation.It includes
normal-SLEEP( QUIET )and Comfortable- SLEEP( ),but
SWING control button
Used to adjust airflow direction.
FAN SPEED control button
Used to select the indoor fan motor speed:
Auto( or ), High( or or ),
Mid( or or ) and Low( or or ).
This function is invalid in sleep mode.
MODE button
11
14
7
5
4
10
Used to select the type of operation mode: FEEL( ),
| 1 | RESET |
COOLING( ), DRY( ), FAN( ) AND HEATING |
| |
( | Only for Heat Pump).FEEL mode can select the operation |
|
mode such as COOL,DRY,FAN,HEAT automatically depending on the room temperature,and the feel mode is default setting at starting.
93D button(optional)
Used to start and stop 3D
10 ECO. button(optional) EC
(This function does not apply to the Units of
11DISPLAY button(optional)
Used to start and stop DISPLAY screen operation .
12
Used to start and stop
13SUPER button(optional) POWERFUL
(This function does not apply to the Units of
14HEALTHY button(optional)
Used to start and stop HEALTHY operation .
15 RESET button(optional)
Used to restart.
Note:The position and figure of buttons are subject to the actual unit,;the relevant function is not activated even if press the optional button which is invalid for some models;
Each mode and relevant function will be further specified in following pages.
4