SONAMP® 875D SE
Specifications
Number of Channels: | 8 (four stereo pairs) |
Output Power (Stereo): | 75 watts RMS per channel (X8), 0.25% THD, 20Hz – 20kHz, @ 8 ohms; |
| 140 Watts per channel (X8), 0.1% THD, 1kHz, @ 4 ohms |
Output Power (Bridged): | 300 Watts per channel (X4) @ 8 ohms |
Frequency Response: | 20Hz – 20kHz, ±1dB |
Total Harmonic Distortion: | 0.05% (1kHz, 8 ohms); 0.10% (1kHz, 4 ohms) |
Signal to Noise Ratio: | |
Input Sensitivity: | 1.5V for 75W RMS Output |
| 1.3V w/BBE ON (+6dB) |
| 1.0V w/BBE ON (+9dB) |
Input Impedance: | 10k ohms |
Maximum Source Input Voltage: | 4.0 VAC RMS |
| 3.0V AC RMS w/BBE ON |
Loop Output Impedance (Buffered): | 100 ohms |
Serial Protocol | 9600, N, 8, 1, single CR |
Power Consumption: | 1,200 Watts |
BTU/HR: | 850 |
AC Fuse: | 10A (T10AL ~ 250V) |
Dimensions (WxHxD): | 16½” x 3 7/8” x 17¼” (419mm x 98mm x 438mm) |
Dimensions (w/Rack Ears, WxHxD): | 19” x 2½” x 17¼” (483mm x 64mm x 438mm) |
Shipping Weight: | 47 lbs (21.4kg) |
Installation Examples
The illustrations on the following pages show the wide variety of audio and audio/video systems that can be assembled using one or more Sonamp 875D SE amplifiers. Your local authorized Sonance dealer is an expert in audio/video system planning and installation. Sonance strongly recommends that you work with your dealer to ensure that your system is properly planned, assembled and installed.
17