Sonance Box Contents, Unpacking, Placement, SONAMP 875D SE 8-CHANNELAMPLIFIER

SONAMP® 875D SE 8-CHANNEL AMPLIFIER

Box Contents

Your Sonamp 875D SE box should contain the following items:

(1)Sonamp 875D SE amplifier

(2)Rack ears

(6)Removable control connectors — connected to the amplifier’s rear panel

(4)Removable speaker connectors — connected to the amplifier’s rear panel

(1)IEC Power cable

Unpacking

Save the shipping carton and polystyrene inserts so you can safely transport your amplifier in the future. Before you install the amplifier, locate the serial number on the rear panel and note it here for future reference:

S/N: __________________

Placement

IMPORTANT: To avoid damage, the amplifier must always rest on its four feet to allow sufficient clearance for proper ventilation.

Place the Sonamp 875D SE on a level surface, in an upright position, out of direct sunlight and away from windows through which rain may enter.

Situate the amplifier away from heat sources such as hot air ducts or radiators. Be sure that the amplifier is adequately ventilated by convection cooling or suitable cabinet fans.

IMPORTANT: The 875D SE requires four inches of clearance on the top and all sides.

•Never place any object on or against the amplifier.

•Never operate the amplifier on a carpeted surface as this will compromise ventilation.

•When the amplifier is installed in any cabinet, the front or back must be open during operation. Alternately, install fans in the cabinet to assure continuous ventilation.

•When rack-mounting, use nylon washers on both sides of the ears to isolate the amplifier from the rack and prevent ground loops and hum problems.

•Very sensitive low-level sources might pick up some hum radiated from the 875D SE’s power supply. If this occurs, move the unit away from the other components.

6