SonicWALL TZ 150 Wireless manual

Applying Power to the

2SonicWALLTZ 150 Wireless

1.Plug the power supply into the back of the security appliance and into an appropriate power outlet.

Warning: Only use a SonicWALL-approved 12V, 1.66A power supply.

The Power LED on the front panel lights up green when you plug in the SonicWALL TZ 150 Wireless. The Test LED lights up and may blink while the appliance performs a series of diagnostic tests. When the Test LED is no longer lit, the security appliance is ready for configuration.

If the Test LED remains lit after the SonicWALL TZ 150 Wireless has booted, disconnect the power to the security appliance for a few seconds and plug it back in to restart the unit.

Note: For more trouble shooting information, refer to the SonicOS Standard 3.0 Administrator’s Guide.

Page 4

Image 5

SonicWALL manual Applying Power to SonicWALLTZ 150 Wireless

Contents

Getting Started Guide Any Items Missing? Check Package ContentsBefore You Begin What You Need to Begin SonicWALLTZ 150 Wireless Configuration Other Information Internet Service Provider ISP InformationCollecting Required Information Applying Power to SonicWALLTZ 150 Wireless Connect the WAN Cable Connecting SonicWALLTZ 150 WirelessConnecting the Ethernet Cables Connect the LAN Cable Accessing the Management Interface Enter 192.168.168.168 in the Location or Address field If the SonicWALL Setup Wizard Does Not Appear Using the SonicWALL Setup Wizard Select Office Gateway and click Next See Procedure 1, Collecting Required Information on WAN Network Mode NAT with Dhcp Client WAN Network Mode NAT Enabled Static IP WAN Network Mode NAT with Pptp Client WAN Network Mode NAT with PPPoE Client WAN Ssid SonicWALL TZ 150 Wireless Getting Started Guide Click Next Testing Your Connection Before You Register Registering Your SonicWALLTZ 150 Wireless SonicWALL TZ 150 Wireless management interface Page Registering Your SonicWALLTZ 150 Wireless Congratulations Connecting to the Wireless Network Connecting Wireless Clients to SonicWALLTZ 150 Wireless Open the SonicWALL Global VPN Client folder Establishing Secure Wireless ConnectionsLaunch setup.exe SonicWALL TZ 150 Wireless Getting Started Guide Page Configuring Computers for Your Network with Dhcp Connecting Computers to Your SonicWALLTZ 150 Wireless Windows Windows XPWindows NT Open Network and Dial-up Connections Start menu, select Settings and then select Control Panel Mounting SonicWALLTZ 150 Wireless Considerations for Mounting the SonicWALL TZ 150 Wireless SonicWALL TZ 150 Wireless Mounting TemplatePage Cable Connections Power Supply Information Models APL15-03AConsiderations for Mounting the APL15-03A North American Authorized Channels Glossary of Networking Terms SonicWALL TZ 150 Wireless Getting Started Guide Trademarks Copyright Notice SonicWALL, Inc Borregas Avenue Sunnyvale, CA