Sony LCD Compatible Installation | Configuration and Connections |
|
|
|
|
5.Verify that the IR Comm Adapter is configured correctly (refer to the IR Comm Adapter User’s Guide). Connect the 3.5 mm male plug end of the supplied cable into the “OUT” jack of the IR Comm Adapter. Connect the other end of the cable into the “CONTROL S IN” port of the projector. If a hardwired remote or host controller is being implemented, connect that device to the “IN” jack of the IR Comm Adapter.
6.Plug the
______ Secure all of the connector screws.
7. Plug the (4 or 5) BNC connectors from one end of the
Use the illustration below as a guide when connecting the System 4xi to a Sony
LCD projector. Refer to Sony documentation to continue the installation.
Hardwired remote/
host controller
Cable
IR Comm Adapter
Female |
CC 50'
____________ In a rack mount, do NOT allow the weight of the cables to be supported by the
System 4xi. See page 2-5 for cabling guidelines.
Extron • System 4xi Switcher Series • User’s Manual • P/N | Page 2 |