Sony 26-473-01, 26-483-01 Sony LCD Compatible Installation, Configuration and Connections, Page

Sony LCD Compatible Installation Configuration and Connections

5.Connect the Comm Adapter to the “RS-232C/422A” port on the projector.

6.Connect the CC-50’ or (CC-100’) cable from the 9-pin male connector of the Comm Adapter to the 15-pin HD “PJ COMM” port on the rear panel of the System 4xi.

______ Secure all of the connector screws.

7.Ensure the projector’s RS-232C/RS-422A switch is in the RS-232C position.

8.Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV

cable into the System 4xi output Connect the other end of the cable into the “INPUT A” BNC connectors of the projector.

Use the illustration below as a guide when connecting the System 4xi to a Sony

RS-232 projector. Refer to Sony documentation to continue the installation.

	9-pin
Comm Adapter	Male
	E
26-473-01	Male

9-pin

Female

0 1

CC 50'

15-pin

____________ In a rack mount, do NOT allow the weight of the cables to be supported by the

System 4xi. See page 2-5 for cabling guidelines.

____________ Ensure the projector’s INDEX and PERIPHERAL dials are set to 01.

Extron • System 4xi Switcher Series • User’s Manual • P/N 68-428-02 Rev. C Page 6