Notes
“Passcode” may be called “Passkey,” “PIN code,” “PIN number” or “Password,” etc. depending on the device.
This system only supports numerical passcodes up to 4 digits.
The pairing standby status of the system is cancelled after about 30 seconds. If pairing is not successful, redo the procedure from step 1.
While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device.
To erase all the pairing registration information
1Press FUNCTION +/repeatedly
to select “BLUETOOTH” (or press BLUETOOTH on the unit).
When the system is connected with a Bluetooth device (when the Bluetooth device name or other information
appears in the system display), press and hold BLUETOOTH OPR on the unit for about 2 seconds to put the system in Bluetooth standby mode.
2Press CLEAR .
“Delete?” appears.
3Press ENTER .
“Complete!” appears and all the pairing information is erased.
Note
In order to connect with a Bluetooth device after performing this operation, you must enter the passcode again.
Playing music of a Bluetooth device
You can operate a Bluetooth device by connecting the system and a Bluetooth device using AVRCP. If the system is not connected with a Bluetooth device using AVRCP, “Not In Use” appears when you operate the system.
1 Select the Bluetooth function.
Press FUNCTION +/repeatedly to select “BLUETOOTH” (or press BLUETOOTH on the unit).
2 Establish a connection from the Bluetooth device.
For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device.
Once the connection is established, the system display changes as follows: “Connect” Name of the Bluetooth device
3 Start playback.
Press (or BLUETOOTH
on the unit).
Depending on the Bluetooth device, you may need to start up the AV software of the Bluetooth device beforehand.
Device Bluetooth
Continued