The disc title, album title, track title and
Use a disc that conforms to the ISO 9660 Level 1, Level 2, or Joliet (expansion).
The character code that can be displayed by this system are as follows:
Upper cases (A to Z)
Lower cases (a to z)
Numbers (0 to 9)
Symbols (< > * +, / [ ] _)
Other characters may not be displayed correctly.
The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track.
Check the speaker connections (page 19).
Depending on the DVD VIDEO, the output signal may not be the entire 5.1 channel. It may be monaural or stereo, even if the sound track is recorded in Dolby Digital or MPEG audio format.
The sound loses stereo effect when you play back an AUDIO CD, VIDEO CD, MP3 audio track, DivX video file or DVD VIDEO.
Make sure the system is connected properly.
Unplug the microphone or press KARAOKE MODE repeatedly until “KARAOKE MODE: OFF” appears on the TV screen.
Bluetooth device
Pairing cannot be done.
Move the Bluetooth device closer to the system.
Pairing may not be possible if other Bluetooth devices are present around the system. In this case, turn off the other Bluetooth devices.
Connection is not possible.
The Bluetooth device you attempted to connect does not support the A2DP and AVRCP profiles, and cannot be connected with the system.
Enable the Bluetooth function of the Bluetooth device.
The pairing registration information has been erased. Perform the pairing operation again.
While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device.
The sound skips or fluctuates, or the connection is lost.
The system and the Bluetooth device are too far apart.
If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles.
If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away.
Information Additional
Continued