4 Adjust the volume.
Press VOLUME +/.
To check the address of a connected Bluetooth device
Press DISPLAY while the Bluetooth device name appears in the system display.
The Bluetooth device address appears for 8 seconds.
To cancel the connection with a Bluetooth device
Press and hold BLUETOOTH OPR on the unit for about 2 seconds until “Disconnect” appears, or until the information on the display (device name, etc.) disappears.
Other operation
To | Press |
Pause playback | . |
Stop playback | . |
Select a file | /. |
Find a point in | Hold down / |
a file | . |
Note
These operations may not be available for certain Bluetooth devices. In addition, the actual operations may differ depending on the connected Bluetooth device.
Notes on connections with Bluetooth devices
If you cannot connect with a paired Bluetooth device, perform the pairing operation between the system and the Bluetooth device again.
Depending on the type of Bluetooth device, you can adjust the volume using the controls of the Bluetooth device.
When BLUETOOTH on the unit is pressed while connected to Bluetooth headphones, it may take some time until a connection is made to the system from another Bluetooth device.