4 Press and hold BLUETOOTH OPR on the unit for about 7 seconds until the BLUETOOTH indicator flashes.
Sound output from the speakers is stopped.
5 Enter the passcode.
Follow the same procedure as in step 4 of “Pairing this system with a Bluetooth device” (page 64).
Once pairing is completed and the connection is established, the system display changes as follows: “Connect” Name of the Bluetooth device
To cancel passcode entry partway
Press .
Notes
“Passcode” may be called “Passkey,” “PIN code,” “PIN number” or “Password,” etc. depending on the device.
This system only supports numerical passcodes up to 4 digits.
The pairing standby status of the system is cancelled after about 30 seconds. If pairing is not successful, redo the procedure from step 1.
While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device.
Pairing may not be possible if other Bluetooth devices are present around the system. In this case, turn off the other Bluetooth devices.
To erase all the pairing registration information
1Press FUNCTION +/repeatedly
to select “BLUETOOTH” (or press BLUETOOTH on the unit).
When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH OPR on the unit for about 2 seconds to put the system in Bluetooth standby mode.
2Press CLEAR .
“Delete?” appears.
3Press ENTER .
“Complete!” appears and all the pairing information is erased.
Note
To connect with Bluetooth headphones after performing this operation, you must enter the passcode again.