Should you encounter a problem with your system, do the following:
1Make sure the power cord and speaker cords are connected correctly and firmly.
2Find your problem in the troubleshooting checklist below and take the indicated corrective action.
If the problem persists after doing all of the above, consult your nearest Sony dealer.
If the STANDBY indicator flashes
Immediately unplug the power cord, and check the following items.
If your system has a voltage selector, is the voltage selector set to the correct voltage?
Are you using only the supplied speakers?
Is anything blocking the ventilation holes on the rear of the system?
After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer.
General
The clock or timer setting is canceled.
The power cord is disconnected or a power failure occurred. Redo “Setting the clock” (page 24). If you have set the timer, redo “Waking up to music” (page 81).
“–
A power failure has occurred. Set the clock (page 24) and timer settings (page 81) again.
There is no sound.
Press VOLUME + repeatedly.
The headphones are connected to the PHONES jack .
Check the speaker connections (page 19).
The system is in pause mode, in Slow-
motion Play or in Lock Search. Press (or DVD on the unit) to start the playback.
Information Additional
Continued