If the following messages appear, follow the instructions.
For “InfoLITHIUM” battery only
•An incompatible battery pack is being used (page 17).
Set date and time?
•Set the date and time. If you have not used the camera for a long time, charge the internal rechargeable battery (pages 25, 163).
Power insufficient
•You tried to perform [Cleaning mode] when the battery level is insufficient. Charge the battery pack or use the AC Adaptor/ charger (not supplied).
No card
• Insert a memory card.
Unable to use card. Format?
•The memory card was formatted on a computer and the file format was modified, or the memory card was formatted on another device. Select [OK], then format the memory card. You can use the memory card again, however, all previous data in the memory card is erased. It may take a some time to complete the format.
If the message still appears, change the memory card.
Card error
•An incompatible memory card is inserted or the format was failed.
Reinsert the card.
•The inserted memory card cannot be used in your camera.
•The memory card is damaged.
•The terminal section of the memory card is dirty.
Processing...
•When Long exposure noise reduction will be done for the same amount of time that the shutter was open. You cannot do any further shooting during this reduction.
Unable to display.
•Images recorded with other cameras or images modified with a computer may not be able to be displayed.
No lens attached. Shutter is locked.
•The lens is not attached properly, or the lens is not attached. When attaching the camera to an astronomical telescope or something similar, set the recording mode to M.
Others
161