To remove the memory card

Check that the access lamp is not lit, then open the memory card cover, push down the memory card eject lever. After the card is ejected a little, pull out the memory card.

Memory card eject

lever

Access lamp

Notes on using memory cards

The memory card may be hot just after it has been used for a long time. Be careful when you handle it.

When the access lamp is lit, do not remove the memory card or the battery pack, or turn off the power. The data may be corrupted.

Data may be damaged if you place the memory card near strongly- magnetized material or use the memory card in a static-prone or electrically noisy environment.

We recommend backing up important data, such as to a hard disk of a computer.

When you carry or store the memory card, put it in the case supplied with it.

Do not expose the memory card to water.

Do not touch the terminal section of the memory card with your hand or a metal object.

On the CF card/Microdrive

Be sure to format the CF card/Microdrive using this camera when you use it for the first time.

Do not remove the label of a CF card/Microdrive or attach a new label over the label.

Do not press on the label strongly.

Notes on use of the Microdrive

A Microdrive is a compact and lightweight hard disk drive that complies with CompactFlash Type II.

22