Specifying DPOF
Using the camera, you can specify the images and the number of images to print before you print images at a shop or with your printer. Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended that you unspecify them after printing.
Specifying /unspecifying DPOF on selected images
1 MENU button t 
1 t[DPOF setup] t[Marked images]
An image is displayed on the single screen.
2Select the image with b/B on the controller.
3Select the number of sheets with the 
/
buttons.
• To unspecify DPOF, set the number to “0.”
4Press the MENU button.
5Select [OK] with v on the controller, then press the center of the controller.
Notes
•You cannot specify DPOF on RAW data files.
•You can specify any number up to 9.
•If you unspecify DPOF, the index print is also canceled.
Specifying/unspecifying DPOF on all the images
MENU button t 
1 t[DPOF setup] t[All images] or [Cancel all] t[OK]
images Printing
141