USB cable (supplied)

USB adapter cable (supplied)

For details on receiver operations, refer to the operating instructions supplied with the receiver.

When you select REMOTE:

The transmitter searches for a receiver that it has been paired with. After the transmitter detects the receiver, the transmitter exchanges the encryption key with receiver and encrypted transmission begins.

Using password mode

(PASSWORD)

Set this mode when multiple transmitters are paired with multiple receivers for encrypted transmission.

If both transmitters and receivers are set with the same user-designated password, the audio signal can be decoded. This mode is useful when multiple transmitters and receivers are used as a single group, or when the audio signal from one transmitter is received by multiple receivers at the same time.

1 Hold down the SET button until the item to be set flashes in the ENCRYPTION indication on the transmitter.

2 Press the + or – button repeatedly to select PASSWORD, and then press the SET button.

3 Input a password of up to eight characters on the transmitter.

To enter a password, use the procedure described in “Naming of transmitter (NAME)” on page 32.

4 Set the encrypted transmission function setting on the receiver to

PASSWORD.

5 Set the same password that was set on the transmitter.

For details on receiver operations, refer to the operating instructions supplied with the receiver.

Note

It is recommended that you change the password periodically.

Using the encrypted transmission function

29