Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
STANDBY | A H x |
indicator | |
| PHONESPHONES |
| Adjust the volume |
POWER | Connect |
| headphones |
OPEN/ | [/1 |
CLOSE |
|
H x
1 Turn on your TV.
2 Switch the input selector on the TV to this receiver.
3 Press POWER on the receiver.
The receiver enters standby mode and the STANDBY indicator lights up in red.
30GB
4 Press A on the receiver or OPEN/ CLOSE on the remote, and place a disc on the disc tray.
The receiver automatically turns on and the STANDBY indicator turns off.
With the playback side facing down
5 Press H.
The disc tray closes, and the receiver starts playback (continuous play). Adjust the volume on the receiver.
After following Step 5
Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 32), VIDEO CD (page 33).
To turn on the receiver
Press POWER on the receiver. The receiver enters standby mode and the STANDBY indicator lights up in red. Press [/1 on the remote. The receiver turns on and the STANDBY indicator turns off. In standby mode, you can also turn on the receiver by pressing A on the receiver or by pressing H.
To turn off the receiver
Press [/1 on the remote. The receiver enters standby mode and the STANDBY indicator lights up in red. To turn off the receiver completely, press POWER on the receiver. While playing a disc, do not turn off the receiver by pressing POWER. Doing so may cancel the menu settings. When you turn off the receiver, first press x to stop playback and then press [/1 on the remote.