Saving the power in standby mode
Press [/1 on the remote once.
zWhile the receiver is in standby mode, the STANDBY indicator on the receiver lights up.
To cancel standby mode
Press [/1 on the remote once.
Additional operations
OPEN/CLOSE
./>
Hx
XMUTING
To | Operation |
Stop | Press x. |
|
|
Pause | Press X. |
|
|
Resume play after | Press X or H. |
pause |
|
|
|
Go to the next chapter, | Press >. |
track, or scene in |
|
continuous play mode |
|
|
|
Go back to the | Press .. |
preceding chapter, track, |
|
or scene in continuous |
|
play mode |
|
|
|
Stop play and remove | Press OPEN/CLOSE. |
the disc |
|
|
|
Mute the sound | Press MUTING. To |
| cancel muting, press it |
| again or turn up the |
| volume. |
|
|
Note
Do not push the disc tray when closing it. Press OPEN/CLOSE to close the disc tray.
Resuming Playback from the Point Where You Stopped the Disc
When you stop the disc, the receiver |
| ||
remembers the point where you pressed x | Playing | ||
and “RESUME” appears on the front panel | |||
| |||
display. As long as you do not open the disc |
| ||
tray, Resume Play will work even if the | Discs | ||
receiver enters standby mode by pressing | |||
| |||
[/1. |
|
| |
H | x |
|
1 While playing a disc, press x to stop playback.
“RESUME” appears on the front panel display, so you can restart the disc from the point where you stopped the disc.
If “RESUME” does not appear, Resume Play is not available.
2 Press H.
The receiver starts playback from the point where you stopped the disc in Step 1.
zTo play from the beginning of the disc, press x twice, then press H.
continued