The surround effect is difficult to

hear when you are playing a Dolby

Digital sound track.

,Make sure the sound field function is on (page 46).

,Check the speaker connections and settings (pages 16, 23, 68).

,Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital format.

The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track.

,Check the speaker connections and setting (pages 16, 23, 68).

,Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.

The sound comes from the centre

speaker only.

,Depending on the disc, the sound may come from the centre speaker only.

No sound is heard from the centre

speaker.

,Make sure the sound field function is on (page 46).

,Select a sound field containing the word “cinema” or “virtual” (page 46).

No sound or only a very low-level

sound is heard from the rear

speakers.

,Make sure the sound field function is on (page 46).

,Select a sound field containing the word “cinema” or “virtual” (page 46).

Operation

Radio stations cannot be tuned in.

,Check that the antennas are connected securely. Adjust the antennas and connect an external antenna if necessary.

,The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.

,No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 28).

,Press DISPLAY so that the frequency appears on the front panel display.

The remote does not function.

,There are obstacles between the remote and the receiver.

,The distance between the remote and the receiver is too far.

,The remote is not pointed at the remote sensor on the receiver.

,The batteries in the remote are weak.

The disc does not play.

, There is no disc inside.

 

, The disc is turned over.

 

 

Insert the disc with the playback side facing

 

down on the disc tray.

Additional

, The region code on the DVD does not match

, The disc is skewed.

 

, The receiver cannot play CD-ROMs, etc.

 

(page 7).

Information

the receiver.

 

, Moisture has condensed inside the receiver.

 

Remove the disc and leave the receiver turned

 

on for about half an hour (page 3).

 

continued

73GB