Using only the front | Adjusting the level |
speakers (2 Channel Stereo) | parameters |
SOUND
FIELD +/–
Press SOUND FIELD +/– repeatedly until “2CH STEREO” appears on the front panel display.
This mode outputs the sound from the front left and right speakers only. Standard 2 channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to 2 channel.
Note
No sound is output from the sub woofer when “2CH STEREO” is selected. To listen to 2 channel (stereo) sources using the front left and right speakers and a sub woofer, press SOUND FIELD +/– repeatedly to select “A.F.D.”
The level menu contains parameters that let you adjust the balance and speaker volumes of each speaker (page 26).
ENTER
C/X/x/c
AMP MENU
1 Start playing a programme source encoded with multichannel surround sound.
2 Press AMP MENU repeatedly.
9LEVEL appears on the front panel display.
3 Sit in your listening position and select the item to be adjusted using X/x.
4 Adjust the volume level using C/c.
The adjusted value will appear on the front panel display. If you do not operate the remote for a few seconds, the value turns off and is stored in the receiver.