xPAUSE MODE (DVD only)
Selects the picture in pause mode.
AUTO | The picture, including subjects |
| that move dynamically, is output |
| with no jitter. Normally select |
| this position. |
FRAME | The picture, including subjects |
| that do not move dynamically, is |
| output in high resolution. |
|
|
xPARENTAL CONTROL t (DVD only)
Sets a password and playback limitation level for DVDs with playback limitation for children. For details, see “Limiting playback for children (Parental Control)” (page 55).
xTRACK SELECTION (DVD only)
Gives the sound track having the highest number of channels priority when you play a DVD on which multiple audio formats (PCM, MPEG audio, DTS, or Dolby Digital format) are recorded.
OFF No priority given.
AUTO Priority given.
Notes
•When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 65).
•If PCM, DTS, MPEG audio, and Dolby Digital sound tracks have the same number of channels, the receiver selects PCM, DTS, Dolby Digital, and MPEG audio sound tracks in this order.
•Depending on the DVD, the audio channel with priority may be predetermined. In this case, you cannot give priority to the DTS, Dolby Digital, or MPEG audio format by selecting “AUTO.”
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and the balance of the speakers to the same level.
Select “SPEAKER SETUP” in the setup display. For details, see “Using the Setup Display” (page 64).
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
FRONT:LARGE
CENTER:LARGE
REAR: LARGE(BEHIND,LOW)
SUBWOOFER:YES
To return to the default setting Select the item, then press CLEAR.
xSIZE
When you do not connect centre or rear speakers, or move the rear speakers, set the parameters for FRONT, CENTER, REAR, and SUBWOOFER. The default settings are underlined.
•FRONT
—LARGE: Normally select this.
—SMALL: Select this if the small speakers are used for the front speaker.
•CENTER
—LARGE: Normally select this.
—SMALL: Select this if the small speaker is used for the centre speaker.
—NONE: Select this if no centre speaker is used.