idx>.L0.AAAAyA<H

Location and Function of Parts

5CCU (Camera control unit) connector (CA- TX7: Kings triaxial connector, CA-TX7P: Fischer triaxial connector)

Connect a camera control unit via a triaxial cable. In addition to supporting signal transmission between this unit and the connected camera control unit, the triaxial cable enables this unit to receive its power supply via the camera control unit.

Using a coaxial cable to connect the camera control unit

The CCU connector must be refitted to enable connection of a coaxial cable. Note that connecting a coaxial cable makes it impossible for this unit to receive power from the camera control unit. Use a CMA-8A/8ACE AC Adaptor for AC power sources.

Contact your Sony dealer for more information on refitting the CCU connector.

6DATA connector (10-pin)

Outputs control signals for the lens (focus or zoom control) and the tripod head (panning or tilting) that are sent from a remote control panel connected to the camera control unit.

For further information about using this connector, consult your Sony dealer.

7DC OUT connector (4-pin)

Use this connector when supplying power (DC 12V, Max. 12 W) to a WRR-810A UHF Portable Tuner (supplied separately) or an LCD teleprompter unit.

Note

Never connect a unit that has a power consumption rating of more than 12 W.

8DC IN connector (XLR 4-pin)

When connecting this unit to a camera control unit via a coaxial cable, use this connector for a CMA-8A/ 8ACE AC Adaptor (supplied separately). Use the CCQX-3 DC power cord to connect the CMA-8A/ 8ACE to this unit.

10