idx>.L0.AAAAyA<H
Location and Function of Parts
6RETURN 1/RETURN 2 buttons
Select the return video signal1) to be output from the RETURN OUT connector and to the camera’s viewfinder.
Press the RETURN 1 or RETURN 2 button to select the return video signal 1 or return video signal 2 from the camera control unit.
To show the shooting picture on the viewfinder screen, release the button. The return video signal which selected last is still output from the RETURN OUT connector if the button is released.
7BREAKER button
The power to this unit is cut off when the circuit breaker is activated by a power source or connection problem. After resolving the problem, press this button to reset the breaker.
If the breaker gets activated even after correcting the connection, contact your Sony dealer.
8POWER switch
Turns this unit’s power supply on and off.
To power the unit, set the switch to EXT or CCU according to the type of power source being used.
EXT | Power supplied via an optional |
| Adaptor connected to the DC IN connector (when |
| this unit is connected to a camera control unit via a |
| coaxial cable) |
|
|
CCU | Power supplied via camera control unit (when this |
| unit is connected to a camera control unit via a |
| triaxial cable) |
|
|
Set this to OFF to turn off the power supply.
When this unit is connected to a camera control unit via a triaxial cable, the following functions continue to operate even after the power is turned off.
•Intercom communication
•On/off control of the back tally indicator (when TALLY switch is ON)
•Calling via CALL button
..........................................................................................................................................................................................................
1)Return video: Video signals that are sent from a camera to a camera control unit and returned to the same or another camera so that the camera operators can check the recorded image.
6