Switches and Knobs on the Rear and Right Side

1 Cursor knobs

2 TALLY switch

3 Back tally indicator

4 CALL button

7 UHF portable tuner

 

taps

5 AUDIO SELECT (CH1/CH2) switches

8 CURSOR switch

 

6 MIC IN +48V (CH1/CH2) switch

 

Illustration: CA-TX7

idx>.L0.AAAAyA<H

1Cursor knobs (for DXC-D30/D30P)

When the CURSOR switch 8 is set to A or B, this adjusts the position and size of the box cursor that is displayed in the viewfinder of the DXC-D30/D30P.

H-POSITION:Adjusts the horizontal position of the box cursor.

V-POSITION:Adjusts the vertical position of the box cursor.

WIDTH: Adjusts the width of the box cursor.

HEIGHT: Adjusts the height of the box cursor.

2TALLY switch

Set this switch to the ON position to activate the back tally indicator 3.

3Back tally indicator (red)

When the TALLY switch 2 is in the ON position, this indicator lights (in red) in response to this unit’s operating status. It also lights when the CALL button on the camera control unit or remote control panel has been pressed.

4CALL button

Press this button to call the operator of the camera control unit or remote control panel. Pressing this button lights the tally indicator (red) on the camera control unit, on the remote control panel, and in the camera’s viewfinder. This unit’s back tally indicator

3also lights if the TALLY switch 2 is in the ON position.

5AUDIO SELECT (CH1/CH2) switches

Select the source for signals to be transferred via the camera control unit’s channel 1 and channel 2.

CAMERA: Transfers audio from a microphone on the camera to the camera control unit.

CA-MIC:Transfers audio from a microphone connected to this unit’s MIC IN (CH1/CH2) connector to the camera control unit.

CA-LINE:Transfers audio from a line output connected to this unit’s MIC IN (CH1/CH2) connector to the camera control unit.

7