Mounting on Video Camera
idx>.L0.AAAAyA<H
5 Tighten the two screws (M4 ×
6) to fix the shoulder pad.
Note
Slide the shoulder pad to its central position before tightening the screws. Otherwise the screws may not be properly fixed.
M4 × 6 screws
Removing from the camera
Follow the procedure above in reverse.
Notes on Use
Use and storage locations
Avoid using or storing the unit in the following places:
•Where it is subject to extremes of temperature (operating temperature:
Note that in summer the temperature in a car with the windows closed can reach 50ºC (122ºF).
•Very damp or dusty places.
•Where rain is likely to reach the unit.
•Places subject to severe vibration.
•Near strong magnetic fields
•Near transmitting stations generating strong radio waves.
Avoid violent impacts
Dropping the unit, or otherwise imparting a violent shock to it, is likely to cause it to malfunction.
Do not cover with cloth
While the unit is in operation, do not cover it with a cloth or other material. This can cause the temperature to rise, leading to a malfunction.
After use
Turn the POWER switches on the unit and camera control unit off.
Care
If the body of the unit is dirty, wipe it with a dry cloth. For severe dirt, use a soft cloth steeped in a small amount of neutral detergent, then wipe dry. Do not use volatile solvents such as alcohol or thinners, as these may damage the finish.
14