Location and Function of Parts

Front and Left Side

Accessory shoe

2 TALK switch

3 INTERCOM switch

4 INTERCOM knob

.AAAAyA<H

5 PROGRAM knob Shoulder strap fitting

6 RETURN 1/RETURN 2 buttons

1 Camera connector

7 BREAKER button

8 POWER switch

idx>.L0

1Camera connector (PRO 76-pin DIGITAL or PRO 50-pin)

Connects to the camera’s VTR connector. Two types of connectors are provided and can be replaced according to the camera.

PRO 76-pin DIGITAL: Use this connector for docking with the DXC-D30/D30P digital video cameras.

PRO 50-pin:Use this connector for docking with the DXC-637 series analog video cameras.

For details on replacing these connectors, see “Mounting on video Camera” on page 11.

Note

Use a DXC-D30/D30P with ROM of ver. 1.1 or later. For version check and ROM change, consult your Sony dealer.

2TALK switch

Selects whether or not to transfer intercom audio from the camera to the camera control unit.

ON: Transfers intercom audio from camera to camera control unit.

OFF: Do not transfer intercom audio from camera to camera control unit.

REMOTE: Transfers intercom audio from camera to camera control unit only while the VTR START button on camera or lens is being pressed.

3INTERCOM switch

Selects the channel for transferring intercom audio. CH1: Selects CH1 (channel 1).

CH2: Selects CH2 (channel 2).

Note

When the LINE switch on the CCU-TX7/TX7P Camera Control Unit is in the PRIV position, the intercom operates only between the camera and the camera control unit regardless of the INTERCOM switch position.

4INTERCOM knob

Adjusts the intercom audio reception level.

When using a DXC-D30/D30P, setting the TALK switch 2 to REMOTE will enable the audio level knob on the DXC-D30/D30P’s front panel to adjust both the intercom audio and program audio levels.

5PROGRAM knob

Adjusts the program audio reception level.

When using a DXC-D30/D30P camera, setting the TALK switch 2 to REMOTE will enable this knob to adjust the balance between the program audio and intercom audio levels. Turn clockwise to raise the program audio level, and turn counterclockwise to raise the intercom audio level.

5