Mounting on Video Camera

This unit is dockable with the DXC-D30/D30P digital video camera or with a DXC-637 series analog video camera.

Replace the camera connector according to the camera to be used. Using a DXC-D30/D30P :Use the PRO 76-pin DIGITAL connector. Using a DXC-637 series camera : Use the PRO 50-pin connector.

Note

Turn the POWER switch off before mounting the unit on the camera.

Using the DXC-D30/D30P

Replace the PRO 50-pin connector with the PRO 76-pin DIGITAL connector.

1 Loosen the two screws (M3) and remove the cover from the PRO 50-pin connector.

Note

Never loosen the other screws.

PRO 50-pin connector

Cover

2 Press the right side of the PRO

50-pin connector until the PRO

76-pin DIGITAL connector appears.

The both connectors swing to switch the positions by pressing either of them.

idx>.L0.AAAAyA<H

PRO 50-pin connector

PRO 76-pin DIGITAL connector

(Continued)

11