Editing onto Another Tape
You can create your own video program by editing with any other h8 mm, HHi8, jVHS,
k
After connecting the camcorder to the VCR,
(1)Slide the POWER switch to PLAYER.
(2)Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your recorded tape into the camcorder.
(3)Play back the recorded tape on the camcorder until you locate the point where you want to start editing. Then press P to set the camcorder to playback pause mode.
(4)Set the recording VCR to recording pause mode.
(5)Press Pon the camcorder and then on the VCR to start editing.
: Signal flow |
To Edit More Scenes
Repeat steps 3 to 5.
To Stop Editing
Press p STOP on the camcorder and VCR.
30
