Checking the Recorded Picture
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder.
(1)While pressing the small green button on the POWER switch, slide it to CAMERA.
(2)Turn STANDBY up.
(3)Press EDITSEARCH. Press the – (Î) side momentarily, the last few seconds of the recorded portion plays back (Rec Review).
Hold down the – side of EDITSEARCH until the camcorder goes back to the scene you want. The last recorded portion is played back. To go forward, hold down the + side (Editsearch).
S |
T |
A |
N |
D |
BY |
Hintsfor Better Shooting/Checking the Recorded Picture |
To Begin Re-recording
Press START/STOP.
15