Sony CCD-TR98, CCD-TR78, CCD-TR88 operation manual Replacing the Bulb

Replacing the Bulb

Use the Sony XB-3D halogen lamp (not supplied).

Remove the power source before replacing the bulb.

(1)While pushing the hole under the built-in light unit using a wire, remove the unit.

(2)Turn the bulb housing counterclockwise and detach from the built-in light unit.

(3)Replace the bulb using a dry cloth.

(4)Attach the bulb housing turning it clockwise, then replace the built-in light unit.

1

2 3

CAUTION

•When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to reduce the risk of fire.

•To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more).

Note

To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. If the bulb is smudged, wipe it completely.

Using the Built-in Light

23

CCD-TR78/TR88/TR98 3-810-917-13.E