3-4. CD MECHANISM DECK (CDM59-5BD27)
3 three screws | 9 CD mechanism deck |
(BVTP3 ⋅ 8) |
5screw (BVTP3 ⋅ 8)
a
4Slide the tray until the screw that fixes the table assy can be seen through around hole a in the table assy.
2 three screws (BVTP3 ⋅ 8)
6
7 wire (flat type) (21 core) (CN301)
8connector (CN311)
1 Insert a tapering driver from the bottom of the chassis, and turn it in the direction of the arrow until the base unit goes down to the lowest position.
3-5. MAIN BOARD
3 two screws (PTTWH3 ⋅ 6)
2 two screws (BVTP3 ⋅ 8)
5MAIN board
1 three screws (BVTP3 ⋅ 8)
4two PC board holders
10
