Chapter 1
Getting
Started
This chapter provides you with information how to connect and setup the Unit.
Setting up the System
Your system has already been installed by an installer. If you want to change the configuration, the TV or the audio equipment, check the location of the VIDEO out jack, the LINE IN jack, and the IR IN/OUT jack. Contact your nearest installer for details on the connections required by the system.
Connecting a TV
Connections between the Unit and each device are made via cables or cords coming through the wall.
Connect the VIDEO OUT of the Unit to a TV.
Select one of the ways of connection methods shown below, according to the input jack on your TV.
| VIDEO cord (not supplied) | ||
VIDEO OUT | or | TV | |
of Unit | |||
|
| ||
S VIDEO cord (not supplied)
Note
Do not connect a VCR, etc., between your TV and the Unit. If you pass the Unit signals via the VCR, you may not receive a clear image on the TV screen. If your TV has only one video input jack, connect the Unit to this jack.
X | VCR | X |
|
|
|
VIDEO OUT
of Unit
TV
Connect directly
Connecting audio Equipment
Connections between the Unit and each of devices are made via cables or cords coming through the wall.
The Unit can input sound from external audio equipment via the audio connectors on the Unit. Connect the OUTPUT jacks (L/R) of the audio equipment to the LINE IN (L/R) jacks of the Unit using the proper audio cords (optional).
Unit |
|
|
| CD Changer |
| ||||
|
|
|
|
|
LINE IN |
|
| LINE OUT | |