Monitoring Other Rooms (MONITOR)
You can monitor other rooms via the Unit. While MONITOR is set to ON, the internal speaker is activated and speakers connected to the Unit are muted. The streaming on the network stops until the monitor connection is terminated on the both of monitoring and monitored Units.
1Press the “V” SELECT on the Home Menu, then press “MONITOR” SELECT.
The Room list appears.
2Press any SELECT to select the room you want to monitor.
If the room you want to monitor is not displayed on the front panel display, press the “V” SELECT to display the next page.
The Monitoring display appears, and a connection with the room is established.
3To cancel monitoring, press the “OFF” SELECT.
Note
Monitoring continues until MONITOR is canceled.
To adjust the speaker level during MONITOR
The volume of the Monitor function is independent from that in audio control.
Adjust the volume with + VOLUME and – VOLUME on the Unit while MONITOR connection is established.
Excluding a Unit from MONITOR
(Monitor Privacy)
You cannot monitor a room, for which the Monitor Privacy is set to ON.
1Press the “V” SELECT on the Home Menu, then press the “SETUP” SELECT.
The Setup Menu appears.
2Press the “V” SELECT repeatedly until “MONITOR PRIVACY” appears on the front panel display.
3Press the A or B SELECT to activate Monitor Privacy mode.
“PRIVACY” is highlighted and the Monitor Privacy mode is set to ON.
A
B
Press the A or B SELECT again to exit the Monitor Privacy.
6 Chapter
the Using
Network System