Setting the time
You must set the time to make functions available, such as an alarm or a sleep timer. Display the Home Menu as shown below beforehand (see page 18).
1Press the “V” SELECT on the HOME Menu, then press the “CLOCK” SELECT.
The Clock Menu appears.
2Press the “TIME SET” SELECT.
The Time set Menu appears.
3Press the “24H” (or the “12H”) SELECT on the Time set Menu to select the time display mode.
The time display mode toggles between 24H and 12H as you press the button.
4Set the hour and minute using the “HOUR” and the “MIN” SELECT.
5Press HOME to return to Home Menu.
The time is displayed on the right side of the upper line on the HOME Menu.
Note
The clock is not displayed when the Unit is in the Edit Menu or Party mode.
Setting a remote code on the Unit
If the supplied remote interferes with an other, set the remote code for this Unit and the remote to one that differs from the other Unit.
The defalt remote code setting for the Unit and the supplied remote is CIS2.
1Press the “V” SELECT on the HOME Menu, then press the “SETUP” SELECT.
The Setup Menu appears.
2Press the “V” SELECT repeatedly until “SIRCS” appears on the front panel display.
3Press the “SIRCS” SELECT.
4Press the “CIS2” (or “CIS3”) SELECT.
The remote code is set to the same one used by RM SETUP on the remote.
Note
You cannot operate the Unit using the remote when the remote code of the Unit and the remote are different.
Selecting the time interval for automatic
return to the Home Menu
The front panel display automatically returns to the Home Menu when the selected time has elapsed.
The defalt time setting for the Unit is 30 seconds.
1Press the “V” SELECT on the HOME Menu, then press the “SETUP” SELECT.
The Setup Menu appears.
2Press the “V” SELECT repeatedly until “TIME OUT” appears on the front panel display.
3Press the “TIME OUT” SELECT.
4Press the “30sec,” “5sec,” “10sec,” or “No”
SELECT.
Note
If you select “No,” the front panel display does not return to the Home Menu automatically.
13US
1 Chapter Started Getting