Using the Setup Display (DVD Settings) (continued)
4 Chapter
PlayingDiscs
Default (this page)
All the settings explained on pages from 28 to 29 return to the default settings.
Tip
If you select “OTHERS” in “Audio,” “Subtitle,” or “Disc Menu,” select and enter a language code from the language code list (page 55) using the numeric buttons.
To reset all of the settings
1Press DVD SETUP on the remote when the Unit is in stop mode.
The Setting Menu appears.
4Select “Reset,” then press ENTER on the remote.
All the settings explained on pages from 28 to 29 return to the default settings. Do not press X/1(POWER) while resetting the Unit. It may take a few seconds to complete.
2Press G/g to select 
(Preference,) then press ENTER on the remote.
The options for “Preference” appear.
3Press F/f to select “Default,” then press ENTER on the remote.