Changing the operative direction

The operative direction of controls is factory preset as in the illustration below.

To increase

To decrease

If you need to mount the rotary remote on the right of the steering column, you can reverse the operative direction of the controls.

 

 

 

EN

 

 

Press (DSPL) for two seconds while

 

pushing the VOL control.

Tip

You can control the operative direction of controls with the unit.

Adjusting the sound characteristics

You can adjust bass, treble, balance and fader. Each source can store the bass and treble level respectively.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nBAS (bass) nTRE

(treble) nBAL (balance) nFAD (fader)

2 Adjust the selected item by pressing (+) or (Ð).

Adjust within three seconds after selecting. (After three seconds, the buttons work as volume control buttons.)

14

Muting the sound

Press (MUTE). “MUTE-ON” flashes.

To restore the previous volume level, press (MUTE) again.

Changing the sound and display settings

You can set:

•AMBER/GREEN to change the illumination color to amber or green.

•BEEP to turn on or off the beeps.

•DIM (Dimmer) to change the brightness of the display.

•D.INFO (dual information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•LOUD (Loudness) to enjoy bass and treble even at low volume. Bass and treble will be reinforced.

•RM (Rotary Remote) to change the operative direction of the controls of the rotary remote.

—Select “NORM” to use the rotary remote as the factory preset position.

—Select “REV” when you mount the rotary remote on the right of the steering column.

1 Press (SHIFT), then press (2) (SET UP).

2 Press (2) (SET UP) repeatedly until the desired setting mode appears.

Each time you press (2) (SET UP), the item changes as follows:

CLOCK nAMBER/GREEN nBEEP nDIM n D.INFO* nLOUD* nRM

*When you have not tune the station or there is no CD/MD being played, these items will not appear.

3 Press (4) (n) to select the desired setting (for example: ON or OFF).

4 Press (SHIFT).

When the mode setting is complete, the normal playback mode appears.

Actual total number:

Sony CDX-C610RDS (E,F,G,I) 3-856-122-12(2)

 

 

Page 14
Image 14
Sony CDX-C610RDS manual Muting the sound, Changing the sound and display settings, Adjusting the sound characteristics