Sony CDX-C610RDS manual If you have labelled the disc, the bank edit, Track

Notes

•“*WAIT*” appears in the display while the unit is reading the data, or when a disc has not been put into the unit.

•“*FULL*” appears in the display when you try to enter more than 12 tracks into a programme at one time.

Playing the stored programme

Changing the disc order in the changer will not affect programme memory play.

You can select:

•PGM 1 to play Programme 1. •PGM 2 to play Programme 2.

•PGM 1+2 to play Programmes 1 and 2.

1 Press (SHIFT).

2 Press (3) (PLAY MODE) repeatedly until “PGM” appears.

3 Press (4) (n) repeatedly until the desired program appears.

z PGM-1	z PGM-2	z PGM-1+2
	PGM-OFF Z

Progarmme Play starts.

To go back to the normal playback mode, select “PGM-OFF” in step 3 above.

Notes

•If you press the number button during programme memory play, programme memory play is interrupted, and playback of the selected disc starts.

•“NO DATA” appears in the display if no track is stored in the programme.

•If a track stored into the programme memory is not in the disc magazine, the track will be skipped.

•When the disc magazine contains not a single track stored into the programme memory, or when the programme information tracks has not been loaded yet, “NO READY” appears.

Erasing the entire programme

1 Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

CD2 DISC	TRACK
4	7	P108
PLAY MODE		ENTER

“P 1” shows Programme 1 is selected.

If you have labelled the disc, the bank edit mode appears. Press (3) (PLAY MODE) to display “P 1” above.

2 Press (1) (N) repeatedly until “DEL” appears.

DEL

--PGM1--

PLAY MODE ENTER

To erase Programme 2, press (4) (n) repeatedly until “PGM 2” appears.

3 Press (5) (ENTER) for two seconds.

P1

NO DATA

PLAY MODE ENTER

The entire programme is erased.

4 When you finish erasing programmes, press (3) (PLAY MODE) for two seconds.

Adding tracks to the programme

1 Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

CD2 DISC	TRACK		EN
4	7	P108	CD/MD
PLAY MODE		ENTER
“P 1” shows Programme 1 is selected.			Changer
If you have labelled the disc, the bank edit

mode appears. Press (3) (PLAY MODE) to display “P 1” above.

To select Programme 2, press (4) (n) repeatedly until “P 2” appears.

2 Press (1) (N) or (4) (n) to select the track slot number where you want to insert a track.

Track slot number

CD2 DISC TRACK

32 P105

PLAY MODE ENTER

3	Press either side of (SEEK/AMS) to select
	the track you want to insert.
4	Press (5) (ENTER) momentarily to enter
	the track.
	The current track in that slot number and
	the succeeding tracks shift down.
	To continue inserting tracks, repeat steps 2
	through 4.
	Note
	Once all 12 slots have been filled, “*FULL*” appears
	in the display, and you cannot insert tracks.
5	When you finish inserting tracks, press	17
	(3) (PLAY MODE) for two seconds.

Actual total number: Sony CDX-C610RDS (E,F,G,I) 3-856-122-12(2)