EN
Playing tracks repeatedly
— Repeat Play
1 During playback, press (SHIFT).
2 Press (7) (REP) repeatedly until ”Repeat 1“ appears.
SET UP PLAY MODE | REP | SHUF |
SHIFT
1 2 
3 
4 
5 
6 
7 
8 
9
Repeat Play starts.
3 Press (SHIFT).
To go back to normal playback mode, select “Repeat off” in step 2 above.
Playing tracks in random order
— Shuffle Play
1 During playback, press (SHIFT).
2 Press (8) (SHUF) repeatedly until ”Shuf 1“ appears.
SET UP PLAY MODE | REP | SHUF |
SHIFT
1 2 
3 
4 
5 
6 
7 
8 
9
Shuffle Play starts.
3 Press (SHIFT).
To go back to normal playback mode, select “Shuf off” in step 2 above.
Creating a program
— CD Program Memory
You can play the tracks in the order you want by making your own program. You can make two programs: Program 1 and Program 2. You can select up to 12 tracks for each program.
You can store the programs in memory.
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
TRACK
PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
To select Program 2, press (5) (n) repeatedly until “P 2” appears.
2 Push the SEEK/AMS control up or down to select the track you want.
3 Press (6) (ENTER) momentarily.
PLAY MODE | ENTER |
| µ |
| TRACK |
PLAY MODE | ENTER |
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish selecting tracks, press
(4)(PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is reading the data.
•“*Mem Full*” appears in the display when you try to enter more than 12 tracks into a program.
10